Clean the front and rear windshield
where the product is to be mounted onto.
Set an area at the center of the windshield behind the room mirror and horizontally align the mount location. For best ADAS performance, ensure that the mount location is on the center of the car.
Remove the 3M VHB adhesive tape after selecting the mount location. Then mount onto the windshield.
Connect the power cable to the dash cam and neatly arrange the wiring cable through the A-pillar. (For a 2-channel dash cam, Attach the rear camera on the rear window following the same method as the front camera)
Connect the cigar jack to the socket
(or OBD2 plug for Plug-N-Play)
Finally, switch the ignition to ACC (power on) for product to be powered and check videos from the front and rear camera in the live view mode.